Limited research has been done on exoskeletons to enable faster movements of the lower extremities. An exoskeleton’s mechanism can actually hinder agility by adding weight, inertia and friction to the legs; compensating inertia through control is particularly difficult due to instability issues. The added inertia will reduce the natural frequency of the legs, probably leading to lower step frequency during walking. We present a control method that produces an approximate compensation of an exoskeleton’s inertia. The aim is making the natural frequency of the exoskeleton-assisted leg larger than that of the unaided leg. The method uses admittance control to compen-sate the weight and friction of the exoskeleton. Inertia compensation is emulated by adding a feedback loop consisting of low-pass filtered acceleration multiplied by a negative gain. This gain simulates nega-tive inertia in the low-frequency range. We tested the controller on a statically supported, single-DOF exoskeleton that assists swing movements of the leg. Subjects performed movement sequences, first unas-sisted and then using the exoskeleton, in the context of a computer-based task resembling a race. With zero inertia compensation, the steady-state frequency of leg swing was consistently reduced. Adding inertia compensation enabled subjects to recover their normal frequency of swing.

Категория: Научные статьи | Нет комментариев »

Комментарии