Архив категории Ищем научные статьи
Guest Editorial Introduction to the Focused Section on Advanced Intelligent Mechatronics
- Тип контента: Научная статья
- Номер документа: 1402
- Название документа: Guest Editorial Introduction to the Focused Section on Advanced Intelligent Mechatronics
- Номер (DOI, IBSN, Патент): 10.1109/TMECH.2006.878559
- Изобретатель/автор: Не заполнено
- Правопреемник/учебное заведение: Не заполнено
- Дата публикации документа: 2006-08-21
- Страна опубликовавшая документ: Не заполнено
- Язык документа: Не заполнено
- Наименование изделия: Не заполнено
- Источник: http://ieeexplore.ieee.org/search/freesrchabstract.jsp?tp=&a
- Вложения: Не заполнено
- Аналитик: Не заполнено
Категория: Ищем научные статьи | Нет комментариев »
Development of a muscle suit for realizing all motion of the upper limb
- Тип контента: Научная статья
- Номер документа: 1399
- Название документа: Development of a muscle suit for realizing all motion of the upper limb
- Номер (DOI, IBSN, Патент): 10.1109/IROS.2004.1389629
- Изобретатель/автор: Kobayash, H.
- Правопреемник/учебное заведение: Dept. of Mech. Eng., Sci. Univ. of Tokyo, Japan
- Дата публикации документа: 2005-02-14
- Страна опубликовавшая документ: Япония
- Язык документа: Английский
- Наименование изделия: Не заполнено
- Источник: http://ieeexplore.ieee.org/search/freesrchabstract.jsp?tp=&a
- Вложения: Не заполнено
- Аналитик: Не заполнено
A «muscle suit» that will provide muscular support for the paralyzed or those otherwise unable to move unaided is developed as a wearable robot. The lack of a metal frame and use of McKibben artificial muscle allow the muscle suit to be lightweight, making it realistic to use in daily life. To overcome the basic concept of the muscle suit, the armor-type muscle suit is proposed and the abduction motion is realized. However, because of the difficulty in implementing all motion for the upper limb by the armor-type muscle suit, the new structure with the mechanical joints and hard frame is applied and all motion is achieved.
Категория: Ищем научные статьи | Нет комментариев »
Lobster Culture-A Perspective On Intensive Crustacean Rearing
- Тип контента: Научная статья
- Номер документа: 1397
- Название документа: Lobster Culture-A Perspective On Intensive Crustacean Rearing
- Номер (DOI, IBSN, Патент): 10.1109/OCEANS.1983.1152026
- Изобретатель/автор: Conklin, D.
- Правопреемник/учебное заведение: Bodega Marine Lab, Bodega Bay, CA, USA
- Дата публикации документа: 2011-01-13
- Страна опубликовавшая документ: США
- Язык документа: Английский
- Наименование изделия: Не заполнено
- Источник: http://ieeexplore.ieee.org/search/freesrchabstract.jsp?tp=&a
- Вложения: Не заполнено
- Аналитик: Не заполнено
For many years, the production of intensively reared crustaceans in the United States has been assumed to be an economically attractive proposition. In the late 1970’s profitable culture of Homarus in the United States was believed possible upon the development of very large and technologically sophisticated facilities. Until recently, however, commercial development could not proceed due to the lack of essential biological information on reproduction and nutrition which would allow for the application of cost saving technology. Recently it has been shown that egg production in the female lobster can be induced by proper photoperiod manipulation. This finding suggests that with appropriate management practices the commercial culturist could be assured of a reliable supply of seed stock throughout the year. Development of a formulated pelletized diet which supports the growth of juvenile lobsters to adulthood is another recent advance. Although the rate of growth on this laboratory ration is still less than that achieved on a diet of natural food items, this ration serves as a foundation from which to proceed in the development of practical feeds. In addition to refining reproductive control and furthering feed development, at least three additional steps are seen as necessary before the potential of commercial lobster aquaculture can be reliably predicted. First, the existing economic model needs to be examined in light of research which has taken place since its original conception. It is likely that such an effort would lead to a refining of current ideas regarding commercial culture. Second, additional biological research is required to understand the nature of space restriction on growth. Reduction of the space requirement will undoubtedly allow for significant savings in the capital required for commercial facilities. Finally, it would appear to be prudent to validate an improved economic model at a scale appropriate to the envisioned commercial operation.
Категория: Ищем научные статьи | Нет комментариев »
Development of a new shoulder mechanism for a muscle suit
- Тип контента: Научная статья
- Номер документа: 1392
- Название документа: Development of a new shoulder mechanism for a muscle suit
- Номер (DOI, IBSN, Патент): 10.1109/IROS.2005.1545388
- Изобретатель/автор: Suzuki, H., Kobayashi, H.
- Правопреемник/учебное заведение: Dept. of Mech. Eng., Tokyo Sci. Univ., Japan
- Дата публикации документа: 2005-12-05
- Страна опубликовавшая документ: Япония
- Язык документа: Английский
- Наименование изделия: Не заполнено
- Источник: http://ieeexplore.ieee.org/search/freesrchabstract.jsp?tp=&a
- Вложения: Не заполнено
- Аналитик: Не заполнено
A «muscle suit» that provides muscular support for the paralyzed or those otherwise unable to move unaided is being developed as a wearable robot. The lack of a metal frame and use of McKibben artificial muscle allow the muscle suit to be lightweight, making it realistic to use in daily life. Although all motion for the upper limb by the armor-type muscle suit with the mechanical joints and hard frame is realized, shoulder joints has difficulty in smooth motion because of DOF limitation. To overcome the limitation, new link mechanism is proposed and smooth motion for shoulder is achieved.
Категория: Ищем научные статьи | Нет комментариев »
Bioinspired hydraulic joint for highly redundant robotic platforms
- Тип контента: Научная статья
- Номер документа: 1387
- Название документа: Bioinspired hydraulic joint for highly redundant robotic platforms
- Номер (DOI, IBSN, Патент): Не заполнено
- Изобретатель/автор: Scarpa, F., Menon, C., Lira, C., Kianfar, K.
- Правопреемник/учебное заведение: Dept. of Aerosp. Eng., Univ. of Bristol, Bristol, UK
- Дата публикации документа: 2009-07-24
- Страна опубликовавшая документ: Великобритания
- Язык документа: Английский
- Наименование изделия: Не заполнено
- Источник: http://ieeexplore.ieee.org/search/freesrchabstract.jsp?tp=&a
- Вложения: Не заполнено
- Аналитик: Не заполнено
By taking inspiration from the hydraulic system of spiders, we have conceived a novel hydraulic flexible joint suitable to be miniaturized and embedded in robotic platforms. The hydraulic flexible join has a modular design-joints can be positioned in series to obtain highly redundant configurations. In this paper, the design of the hydraulic joint is proposed and its performance is discussed.
Категория: Ищем научные статьи | Нет комментариев »
Статистика
Категорий: 179
Статей всего: 2,003
По типу:
Видео: 36
Выдержка с форума: 1
Контактные данные: 12
Научная статья: 1388
Не заполнено: 5
Новостная статья: 317
Обзор технологии: 42
Патент: 219
Тех.подробности: 34
Тип: 1
Комментариев: 6,672
Изображений: 3,005
Подробней...
ТОР 10 аналитиков
-
Глаголева Елена - 591
Дмитрий Соловьев - 459
Helix - 218
Ридна Украина))) - 85
Наталья Черкасова - 81
max-orduan - 29
Елена Токай - 15
Роман Михайлов - 9
Мансур Жигануров - 4
Дуванова Татьяна - 3
Календарь
Пн | Вт | Ср | Чт | Пт | Сб | Вс |
---|---|---|---|---|---|---|
« Ноя | ||||||
1 | 2 | 3 | ||||
4 | 5 | 6 | 7 | 8 | 9 | 10 |
11 | 12 | 13 | 14 | 15 | 16 | 17 |
18 | 19 | 20 | 21 | 22 | 23 | 24 |
25 | 26 | 27 | 28 | 29 | 30 |
Авторизация
Ошибка в тексте?
Выдели её мышкой!
И нажми Ctrl+Enter