Energetic autonomy of a hydraulic-based mobile robot requires a power source capable of both hydraulic and electrical power generation. The hydraulic power is used for locomo-tion, and the electric power is used for the control computer, sensors and other peripherals. In addition, the power source must be lightweight and quiet. This study presents several designs of internal combustion engine-based power units. Each power unit is evaluated with a Ragone plot which shows its performance over a wide range of operation times. Several hydraulic–electric power units (HEPUs) were built and success-fully demonstrated on the Berkeley lower extremity exoskeleton (BLEEX). The best-performing design of the HEPUs, based upon the Ragone plot analysis, is described in detail. This HEPU produces constant pressure hydraulic power and constant voltage electric power. The pressure and voltage are controlled on board the power unit by a computer. A novel characteristic of this power unit is its cooling system in which hydrau-lic fluid is used to cool the engine cylinders. The prototype power unit weighs 27 kg and produces 2.3 kW (3.0 hp) hydraulic power at 6.9 MPa (1000 p.s.i.) and 220 W of electric power at 15 V DC.

(далее…)

Категория: Научные статьи | Нет комментариев »

Human exoskeletons add the strength and endurance of robotics to a human’s innate intellect and adaptability to help people transport heavy loads over rough, unpredictable terrain. The Berkeley lower extremity exoskeleton (BLEEX) is the first human exoskeleton that was successfully demonstrated to walk energetically autonomous while supporting its own weight plus an external payload. This paper details the design of the electric motor actuation for BLEEX and compares it to the previously designed hydraulic actuation scheme. Clinical gait analysis data was used to approximate the torques, angles and powers required at the exoskeleton’s leg joints. Appropriately sized motors and gearing are selected, and put through a thorough power analysis. The compact electric joint design is described and the final electric joint performance is compared with BLEEX’s previous hydraulic actuation. Overall, the electric actuation scheme is about twice as efficient and twice as heavy as the hydraulic actuation.

(далее…)

Категория: Научные статьи | Нет комментариев »

The Berkeley lower extremity exoskeleton (BLEEX) is an autonomous robotic device whose function is to increase the strength and endurance of a human pilot. In order to achieve an exoskeleton controller which reacts compliantly to external forces, an accurate model of the dynamics of the system is required. In this report, a series of system identification experiments was designed and carried out for BLEEX. As well as determining the mass and inertia properties of the segments of the legs, various non-ideal elements, such as friction, stiffness and damping forces, are identified. The resulting dynamic model is found to be significantly more accurate than the original model predicted from the designs of the robot.

(далее…)

Категория: Научные статьи | Нет комментариев »

In October 2003, the first functional load-bearing and energetically autonomous exoskeleton, called the Berkeley Lower Extremity Exoskeleton (BLEEX) was demonstrated, walking at the average speed of two miles per hour while carrying 75 pounds of load. The project, funded in 2000 by the Defense Advanced Research Project Agency (DARPA) tackled four fundamental technologies: the exoskeleton architectural design, a control algorithm, a body LAN to host the control algorithm, and an on-board power unit to power the actuators, sensors and the computers. This article gives an overview of the BLEEX project.

(далее…)

Категория: Научные статьи | Нет комментариев »

An innovative sensor suit is developed, which can be conveniently put on by an operator to detect his or her motion intention by non-invasively monitoring his or her muscle conditions such as the shape, the stiffness and the density. This sensor suit is made of soft and elastic fabrics embedded with arrays of MEMS sensors such as muscle stiffness sensor, ultrasonic sensors, accelerometers and optical fiber sensors, to measure different types of human muscle conditions. Compared with conventional sensors used in man machine interfaces, the proposed sensor suit is soft, flexible, lightweight, easy to wear, accurate and reliable. More importantly, the sensor suit is auto-adaptive to an individual operator and does not impede motion against the operator. Furthermore, a failsafe mechanism using special hardware and active sensing software is incorporated in the sensor suit to ensure the safety and reliability. As a result, the sensor suit is ideal for use in man-machine systems, particularly the DARPA exoskeleton power suits. In this case, the sensor suit will be worn by the operator under the exoskeleton power suits. The sensor suit, with its distributed sensing capability, will provide accurate and reliable information about the operator’s motion intention which is needed for controlling the power suit to accurately follow the operator s motion intention.

(далее…)

Категория: Научные статьи | Нет комментариев »