A wearable action-assist device includes a biosignal detection unit detecting a biosignal from a wearer, an action-assist wearing tool having a drive source supplying a torque acting on the wearer around each joint of the wearer as an axis of rotation, a control unit controlling the drive source to generate the torque according to the detected biosignal, a drive torque estimation unit estimating a drive torque generated by the drive source, a joint-angle detection unit detecting an angular displacement of the joint, and a parameter identification unit identifying kinetics parameters concerned by substituting the estimated drive torque and the detected angular displacement into an equation of motion of an entire system including kinetics parameters intrinsic to the wearer. The control unit is configured to control the drive source according to a predetermined control method based on the equation of motion into which the identified parameters are substituted.

(далее…)

Категория: Патенты | Нет комментариев »

A method for controlling movement using an active powered device including an actuator, joint position sensor, muscle stress sensor, and control system. The device provides primarily muscle support although it is capable of additionally providing joint support (hence the name “active muscle assistance device”). The device is designed for operation in several modes to provide either assistance or resistance to a muscle for the purpose of enhancing mobility, preventing injury, or building muscle strength. The device is designed to operate autonomously or coupled with other like device(s) to provide simultaneous assistance or resistance to multiple muscles.

(далее…)

Категория: Патенты | Нет комментариев »

Energetic autonomy of a hydraulic-based mobile robot requires a power source capable of both hydraulic and electrical power generation. The hydraulic power is used for locomotion and the electric power is used for the control computer, sensors and other peripherals. In addition, the power source must be lightweight and quiet. This study presents several designs of internal combustion engine-based power units. Each power unit is evaluated with a Ragone plot which shows its performance over a wide range of operation times. The best-performing design of the hydraulic-electric power units (HEPU), based upon the Ragone plot analysis, is described in detail. This HEPU produces constant pressure hydraulic power and constant voltage electric power. The pressure and voltage are controlled on board the power unit by a computer. A novel characteristic of this power unit is its cooling system in which hydraulic fluid is used to cool the engine cylinders. The prototype power unit weighs 27 kg and produces 2.3 kW (3.0 hp) hydraulic power at 6.9 MPa (1000 psi) and 220 W of electric power at 15 VDC.

(далее…)

Категория: Научные статьи | Нет комментариев »

Wheeled vehicles are often incapable of transporting heavy materials over rough terrain or up staircases. Lower extremity exoskeletons supplement human intelligence with the strength and endurance of a pair of wearable robotic legs that support a payload. This paper summarizes the design and analysis of the Berkeley Lower Extremity Exoskeleton (BLEEX). The anthropomorphically-based BLEEX has seven degrees of freedom per leg, four of which are powered by linear hydraulic actuators. The selection of the degrees of freedom, critical hardware design aspects, and initial performance measurements of BLEEX are discussed.

(далее…)

Категория: Научные статьи | Нет комментариев »

По удельной мощности и быстроте действия мышцы человека превосходят традиционные электрические или пневматические приводы для роботов. В попытке найти ненадёжным узлам замену учёные придумывают самые необычные типы искусственных мышц.

(далее…)

Категория: Двигатели | Нет комментариев »