Energetic autonomy of a hydraulic-based mobile robot requires a power source capable of both hydraulic and electrical power generation. The hydraulic power is used for locomotion and the electric power is used for the control computer, sensors and other peripherals. In addition, the power source must be lightweight and quiet. This study presents several designs of internal combustion engine-based power units. Each power unit is evaluated with a Ragone plot which shows its performance over a wide range of operation times. The best-performing design of the hydraulic-electric power units (HEPU), based upon the Ragone plot analysis, is described in detail. This HEPU produces constant pressure hydraulic power and constant voltage electric power. The pressure and voltage are controlled on board the power unit by a computer. A novel characteristic of this power unit is its cooling system in which hydraulic fluid is used to cool the engine cylinders. The prototype power unit weighs 27 kg and produces 2.3 kW (3.0 hp) hydraulic power at 6.9 MPa (1000 psi) and 220 W of electric power at 15 VDC.

(далее…)

Категория: Научные статьи | Нет комментариев »

Wheeled vehicles are often incapable of transporting heavy materials over rough terrain or up staircases. Lower extremity exoskeletons supplement human intelligence with the strength and endurance of a pair of wearable robotic legs that support a payload. This paper summarizes the design and analysis of the Berkeley Lower Extremity Exoskeleton (BLEEX). The anthropomorphically-based BLEEX has seven degrees of freedom per leg, four of which are powered by linear hydraulic actuators. The selection of the degrees of freedom, critical hardware design aspects, and initial performance measurements of BLEEX are discussed.

(далее…)

Категория: Научные статьи | Нет комментариев »